Matek Systems F722-WPX STM32F722RET6 Flight Controller Built-in OSD 2-6S FC for RC Airplane Fixed Wing
Direct purchase from the factory 
Ka sɛn sɔgɔsɔgɔninjɛ
Sɔnni hɔrɔn
Ka taa cogo
Ka segin cogoSɔnni Hɔrɔn
I ni ce Roymall, i ka sɔnniw siti. An bɛ i ka dɛmɛ fɛɛrɛ. O sɔnni hɔrɔn bɛ kɛ i ka sɔnni kɛnɛ kan.Ka Taa Cogo
An bɛ sɔnniw taa i ka so la 2 don kɔnɔ. Kɛnɛ cɛsiri bɛ se ka kɛ 5-7 don kɔnɔ.1. Ka Segin Cogo
Sɔnniw bɛ segin 40 don kɔnɔ. Sɔnni yɛlɛman tɛ segin.2.Ka Sɛn Segin
I bɛ sɛn sɔrɔ segin kɔnɔ.Description:
Brand: Matek
Model: F722-WPX
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: DPS310 (I2C)
OSD: Pixel OSD/FrskyOSD (Uart6)
Blackbox: MicroSD socket (SPI)
6x UARTs(5 Spare) with built-in inversion
1x Softserial_Tx option
10x PWM outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass
1x SH1.0_6pin connector for external USB and buzzer
Dual Camera Inputs switcher
Vbat filtered power ON/OFF switcher
PWM camera menu control: Not supported by INAV
DJI FPV air unit: any spare UART
Power
* 6~30V DC IN (2~6S LiPo)
* 132A high-precision Current Sense (Scale 250)
* PDB/Current sense resistor: 60A continuous, 132A burst.
* BEC 5V 2A for FC & Peripherals
* BEC Vx 5A for servos, 5V/ 6V option
* Vbat filtered output 1A for VTx and Camera
* LDO 3.3V 200mA
* Battery Voltage Sensor: 1:10 (Scale 1100)
FC Firmware
INAV target: MATEKF722WPX
Physical
Dimensions: 44 x 29 x 10 mm
Mounting: 25 x 25mm, u03a62mm
Weight: 20g w/ bottom plate and USB/buzzer adapter
* INAV2.5.x downloaded from configurator doesnu2019t support Barometer DPS310 and SD card. download customized firmware from here.
* inav_2.5.1_MATEKF722PX_DPS310_SD.hex
* DPS310 & SD in target will be supported officially by INAV2.6 and new configurator.
* If Baro canu2019t be detected. In INAV CLI mode, type command u201cset baro_hardware = DPS310u201d
* Since INAV2.6, pls use target MATEKF722WPX
* Update FrskyOSD to 2.0 https://github.com/FrSkyRC/PixelOSD/tree/master/firmware
* INAV configurator nightly version 2.6
Package Included:
1x FC F722-WPX
1x USB(Type-C)/Buzzer (Active) Adapter
1x Bottom plate, 44 x 29mm
2x JST-SH-6P to JST-SH-6P cables, 20cm
5x Brass standoffs, M2*4mm
10x screws, M2*3.5mm
Dupont 2.54 pins (Board is shipped unsoldered)
